Home / All / news /

Rotation Module

Certificates

    Rotation Module

    Aug 4,2011

    Rotation Module

    1,10 / 25 a rotary card module;
    2, the card then life: terminal> 200, cap> 50;
    3, with a screwdriver slot in the plastic cap clockwise 90 °, you can complete the wiring and cut the excess cable;
    4, each connecting point are moisture, oxidation protective agent; color pea green and blue optional telecommunications;
    5, the use of environmental conditions: temperature -20 ~ 60 ℃; relative humidity <85% (+30 ℃); atmospheric pressure of 70 ~ 106KPa
    6, pull-off strength: bronze, silver (20 ~ 40uinch) applies diameter of 0.4 ~ 0.6mm, into the side after the pull-off strength of not less than 25N.
    7, flame retardant: flame retardant plastic parts using PBT or ABS, the combustion performance should meet the GB / T 5169.7-1985 standard.
    8, insulation resistance: the standard atmospheric pressure, either not connected between two terminals, the insulation resistance of not less than 1000MΩ.
    9, the reed contact resistance between the terminals: the standard atmospheric pressure, either not connected to the contact resistance between two terminals is not greater than 7mΩ.
    10, into a side contact resistance: In the standard experimental conditions the wire into the terminal with the terminal contact resistance less than 3mΩ.
    11, Dielectric strength: in line with industry standards.

     welcome to our website to buy!

    subscription
    FOLLOW US